Casco de Iron Man Mk5 de AutoKing, escala 1:1, para cosplay.

Helmet function introduction
Introduction to remote control operation function
Install the No. 5 battery and turn on the helmet power switch
Manual control:
. Power indicator
. touch the sensing area of the right ear: control the opening / closing of the mask
power switch
-Touch the left ear sensing area: control the integral opening / closing of the mask
A control mask integral opening / closing
O B controls the opening / closing of the mask multi piece
Voice control: Chinese / English command
C limit lamp switching color.
Before operating the command, Jarvis / Jarvis “wake up the system” needs to be executed
O d eye light on / off
Only then can the subsequent command operation be carried out. The effective time of waking up the system is 5 seconds
D
Voice operation commands can be input successively
E helmet sound on / off.
. wake up “Jarvis / Jarvis”
Helmet: “hello
Command: “start system / start system”
fault analysis
Helmet: Hello am Jarvis
-Instruction: “open the helmet / open the mask”
: failed to match the password. Try to match the password again after charging the remote control.
Helmet: “multi piece open helmet”
The eye light flashes continuously and slowly, resulting in slow action, blurred sound effect and low power
Replace the battery with a new one
Replace it with a new one
. in case of operation failure and abnormal conditions, restart the system.
. command: “close the mask””
Wear helmet, automatically detect failure and restart the system.
Helmet:. Multi piece closure helmet
Safe operation warning
-Command: “start combat mode”
. precautions for startup: before starting the helmet every time (or when restarting the system power supply)
Helmet: “the eye light turns red
It is necessary to ensure that the mask is closed smoothly before starting the machine, such as the existing part of the mask
If it is fully open, all parts need to be closed manually and gently to ensure that the surface is not stable
-Command: “Disarm mode / close combat mode”
Turn it off and then turn it on. If the product is not used for a long time, please remove the dry battery.
Head Thief: “the eye light turns white”
It is strictly prohibited to open the mask by manual external force, and it is strictly prohibited to open and close the mask by head theft
. command: “shut down system”
If external forces hinder movement, it will cause irreversible damage to the helmet.
Helmet: “enjoy your self, sir.”
. non professionals are not allowed to disassemble the product by themselves.

60CM MK5 Failure analysis
Eye lights continue to flicker slowly, or the action is slow, the sound effect is blurred, and the battery is too low. Replace with a new batteryEye lights continue to flicker slowly, or the action is slow, the sound effect is blurred, and the battery is too low. Replace with a new batteryEye lights continue to flicker slowly, or the action is slow, the sound effect is blurred, and the battery is too low. Replace with a new batteryEye lights continue to flicker slowly, or the action is slow, the sound effect is blurred, and the battery is too low. Replace with a new battery
Operation failure, abnormal situation occurs, restart the system.
Wear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the systemWear a helmet, automatically detect failures, restart the system
Safe operation warning
Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)Precautions for booting: Before booting the helmet each time (or when restarting the system power)
It is necessary to ensure that the mask is closed quietly before turning on, such as the presence of part of the maskIt is necessary to ensure that the mask is closed quietly before turning on, such as the presence of part of the mask
Or fully open, you need to manually close all parts gently to ensure the mask is stable
If the product is not used for a long time, please remove the battery

It is strictly forbidden to remove the mask by manual external force, and it is strictly forbidden to have external force blocking the movement when the helmet is opened and closed, which will cause irreversible damage to the helmetIt is strictly forbidden to remove the mask by manual external force, and it is strictly forbidden to have external force blocking the movement when the helmet is opened and closed, which will cause irreversible damage to the helmetIt is strictly forbidden to remove the mask by manual external force, and it is strictly forbidden to have external force blocking the movement when the helmet is opened and closed, which will cause irreversible damage to the helmetIt is strictly forbidden to remove the mask by manual external force, and it is strictly forbidden to have external force blocking the movement when the helmet is opened and closed, which will cause irreversible damage to the helmet

charging Bluetooth speaker base (can be connected to Bluetooth to play music)

During music playback,

If suspended for more than 5 minutes.

The speaker will go to sleep,

At this time, you need to touch this area to wake up playback